{"title":"Starlink Standard Mounts","description":"\u003cp\u003eMount your full size Starlink securely. This collection covers roof, pole and tilt mounts for Starlink Standard dishes, including Gen 3, Standard 4, 4X and V4 models where stated on each listing.\u003c\/p\u003e\u003cp\u003eFixed tilt roof mounts keep a low profile for travel, while pipe and pole adapters suit homes, cabins and permanent installs. Confirm your dish model before you buy, seal any screw holes and check fixings regularly.\u003c\/p\u003e\u003cp\u003eContact the Low Orbit Supply team if you are unsure which mount fits your dish.\u003c\/p\u003e","products":[{"product_id":"starlink-gen-3-tripod-mount-adjustable-height","title":"Tripod Mount for Starlink Gen 3, Adjustable Height","description":"\u003cp\u003eSet up your Starlink Gen 3 dish anywhere with this adjustable height tripod mount. It comes with a dedicated Gen 3 adapter that snaps tightly onto the bracket with tool free, one click locking, so the dish goes from bag to sky in moments.\u003c\/p\u003e\u003cp\u003eCrafted from premium aluminum alloy, the tripod is light to carry yet stable on uneven ground. A locking knob holds the legs firmly on grass, gravel and packed dirt, keeping the dish steady for consistent signal reception. Adjustable height lets you raise the dish above vehicles, tents and low obstructions and fine tune its position for the strongest possible connection. Getting the dish high and steady is the single easiest way to improve speed and reduce dropouts from trees, vehicles and buildings.\u003c\/p\u003e\u003cp\u003eThe streamlined, foldable design packs down compactly for storage in an RV bay, trunk or large backpack. Weather resistant coatings protect the frame from rain and sun, so it is ready for camping, RV travel, field work and emergency setups. Make sure the legs are fully locked before attaching the dish, and lower it in high winds. The Starlink Gen 3 dish is sold separately, and our team can help pair it with the right cable. It is a practical upgrade that makes setting up faster at every stop, whether you travel full time or head out on weekends.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: Starlink Gen 3\u003c\/li\u003e\n\u003cli\u003eMaterial: aluminum alloy\u003c\/li\u003e\n\u003cli\u003eHeight: adjustable, locking knob\u003c\/li\u003e\n\u003cli\u003eAdapter: snap on, tool free locking\u003c\/li\u003e\n\u003cli\u003eDesign: foldable, weather resistant\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Low Orbit Supply","offers":[{"title":"Gen 3","offer_id":67574430007466,"sku":"15754b94-75ef-43aa-8768-89c493fa0358","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/8980\/1386\/files\/839355783338564f804512c7a33b363d.jpg?v=1791239488"},{"product_id":"starlink-gen-3-rv-roof-mount-8-tilt-stainless-steel","title":"RV Roof Mount for Starlink Gen 3, 8° Tilt, Stainless Steel","description":"\u003cp\u003eTake full size Starlink on the road with this 8° tilt roof mount, engineered for the Starlink Standard 4 and 4X, Gen 3 and V4 Enterprise flat dishes. The built in tilt angle is optimized for signal reception on the move while keeping the profile low for less wind resistance.\u003c\/p\u003e\u003cp\u003eThe stainless steel construction stands up to rain, sun and road grime for reliable performance in extreme and wet weather. An included adapter kit attaches the mount to standard crossbars on most vans, SUVs and RVs, and it also installs on wood, metal, plastic or slotted vehicle rails. Two installation methods give you flexibility to suit your roof. Getting the dish high and steady is the single easiest way to improve speed and reduce dropouts from trees, vehicles and buildings.\u003c\/p\u003e\u003cp\u003eOnce fitted, the dish sits securely so you can stay connected at camp, at work sites and on long highway drives. Check all fixings before each trip and after rough roads, and never exceed your roof rack's load rating. Make sure the dish cable is routed away from doors and hatches. The Starlink dish is sold separately, and our team is happy to help with fitment questions. It is a practical upgrade that makes setting up faster at every stop, whether you travel full time or head out on weekends.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: Starlink Standard 4, 4X, Gen 3, V4 Enterprise\u003c\/li\u003e\n\u003cli\u003eTilt: 8° fixed\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel\u003c\/li\u003e\n\u003cli\u003eIncludes: crossbar adapter kit\u003c\/li\u003e\n\u003cli\u003eSurfaces: crossbars, wood, metal, plastic, slotted rails\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Low Orbit Supply","offers":[{"title":"Default Title","offer_id":67584895451306,"sku":"d797424b-51f4-4cd5-a8ee-dd1f619dd00f","price":64.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/8980\/1386\/files\/d906db626f466f5de08e92afb4ef682d.jpg?v=1791312119"},{"product_id":"starlink-performance-gen-3-marine-mount-stainless","title":"Marine Mount for Starlink Performance Gen 3, Stainless","description":"\u003cp\u003eBring fast, stable Starlink internet to sea with this marine mount for the Starlink Performance Gen 3. It is custom engineered for boat roofs and hardtops, giving the dish a solid, stable platform while you cruise, fish or anchor offshore.\u003c\/p\u003e\u003cp\u003eThe included pipe adapter is precisely designed for the Gen 3 Performance dish, with accurate openings for a close, secure fit. Each mount is made from thickened stainless steel and inspected before shipping, so it holds up to high humidity, salt spray and harsh sun. The substantial weight gives a stable base, and screws are included for a permanent fixed install. Getting the dish high and steady is the single easiest way to improve speed and reduce dropouts from trees, vehicles and buildings.\u003c\/p\u003e\u003cp\u003eIt is a strong choice for yachts, sport fishing boats and commercial vessels that need dependable connectivity for navigation, weather checks and communication. Use marine sealant on every screw hole and check the fixings regularly, especially after heavy seas. Our team is happy to help with any fitting or purchase questions. The Starlink Performance dish is sold separately. It is a practical upgrade that makes setting up faster at every stop, whether you travel full time or head out on weekends.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: Starlink Performance Gen 3\u003c\/li\u003e\n\u003cli\u003eMaterial: thickened stainless steel\u003c\/li\u003e\n\u003cli\u003eIncludes: custom pipe adapter, mounting screws\u003c\/li\u003e\n\u003cli\u003eUse: boat roofs, hardtops, decks\u003c\/li\u003e\n\u003cli\u003eBuild: inspected before shipping\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Low Orbit Supply","offers":[{"title":"Default Title","offer_id":67584897024170,"sku":"fffc4a62-bb49-491e-9400-195cbabd704e","price":140.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/8980\/1386\/files\/a0524cc82ff328a4a8a305f865aed5e2.jpg?v=1791312122"},{"product_id":"starlink-gen-3-roof-mount-8-tilt-aluminum-4-4x","title":"Roof Mount for Starlink Gen 3, 8° Tilt, Aluminum, 4\/4X","description":"\u003cp\u003eMount your full size Starlink on a roof with this 8° tilt mobility mount. It fits the Starlink Standard series flat dishes, including the 4, 4X, Gen 3 and V3, and comes with everything needed for installation: four long bolts, four self tapping screws, four rubber gaskets, four plastic shims and a screwdriver.\u003c\/p\u003e\u003cp\u003eThe 8° tilt angle improves satellite reception, reduces wind resistance while driving and helps shed rain and snow. High strength aluminum alloy with a rustproof, weatherproof coating stands up to marine environments, extreme heat, rain and UV, securing the dish in high winds far better than plastic alternatives. Getting the dish high and steady is the single easiest way to improve speed and reduce dropouts from trees, vehicles and buildings.\u003c\/p\u003e\u003cp\u003eAttach it to wood, fiberglass, metal, plastic or roof racks using the included screws and anchors, then tighten the anti theft screw and snap the dish into place. It is ideal for RVs, campers, SUVs, trucks, vans, boats, semi trucks and off grid cabins. Seal any screw holes with suitable sealant and check fixings regularly. The Starlink dish is sold separately. It is a practical upgrade that makes setting up faster at every stop, whether you travel full time or head out on weekends.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: Starlink Standard 4, 4X, Gen 3, V3\u003c\/li\u003e\n\u003cli\u003eTilt: 8° fixed\u003c\/li\u003e\n\u003cli\u003eMaterial: aluminum alloy, rustproof coating\u003c\/li\u003e\n\u003cli\u003eSecurity: anti theft screw\u003c\/li\u003e\n\u003cli\u003eIncludes: 4 bolts, 4 screws, 4 gaskets, 4 shims, screwdriver\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Low Orbit Supply","offers":[{"title":"Mount For Starlink Gen3","offer_id":67584961839274,"sku":"fe2dd38c-2963-46a2-bd69-224809e76052","price":56.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/8980\/1386\/files\/6368c37907cebab24971e4328a70c5a9.jpg?v=1791312173"},{"product_id":"starlink-performance-gen-3-tripod-mount-ground-anchor","title":"Tripod Mount for Starlink Performance Gen 3, Ground Anchor, Height Adjustable","description":"\u003cp\u003eGet your Starlink Performance Gen 3 off the ground and above obstructions anywhere you park. This folding tripod locks the dish onto a stainless steel adapter, then a ground anchor drives straight into soft soil so the whole setup stays planted when the wind picks up.\u003c\/p\u003e\u003cp\u003eThe alloy legs and reinforced tubing resist twisting and shaking, and rubber feet grip hard surfaces like decks, gravel and concrete. A knob lock lets you change height in seconds to clear trucks, brush or a tailgate, then the tripod folds down small enough for a truck box, trunk or backpack. It is built for camp, remote job sites, hunting leases and emergency setups where a permanent mount is not an option.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: Starlink Performance Gen 3\u003c\/li\u003e\n\u003cli\u003eMaterial: alloy legs, stainless steel adapter\u003c\/li\u003e\n\u003cli\u003eStability: ground anchor plus non slip rubber feet\u003c\/li\u003e\n\u003cli\u003eAdjust: knob lock height adjustment\u003c\/li\u003e\n\u003cli\u003eStorage: folding, compact for travel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Starlink dish is sold separately.\u003c\/p\u003e","brand":"Low Orbit Supply","offers":[{"title":"Performance Tripod","offer_id":67794245320874,"sku":"48f2ea97-3f13-490a-aae6-d0bdaad40e87","price":93.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/8980\/1386\/files\/63be12283095241eb37056c83b27ca55.jpg?v=1793403066"},{"product_id":"starlink-standard-gen-3-telescoping-wall-mount","title":"Telescoping Wall Mount for Starlink Standard Gen 3 and V4, Adjustable Arm","description":"\u003cp\u003eMount your Starlink Standard Gen 3 on a wall, fascia or eave and push it out past gutters and rooflines for a clearer view of the sky. The support arm telescopes in and out and up and down, so you can fine tune position instead of settling for a fixed length bracket.\u003c\/p\u003e\u003cp\u003eThe metal construction is rustproof and weatherproof and rated to hold over 60 lb. Tilt adjusts from 90 to 180 degrees, and a hidden cable channel protects the cable from wear. Expansion anchors for concrete and lag screws for wood are both included. The dish plugs straight into the mount, and the two included screws with spacers add extra security once it is seated. Tighten the screws gently so the spacers do not spin through.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: Starlink Standard Gen 3, V3, V4, Standard 4 and 4X\u003c\/li\u003e\n\u003cli\u003eNot compatible: Starlink Mini, Performance, Standard Actuated\u003c\/li\u003e\n\u003cli\u003eMaterial: rustproof metal, rated over 60 lb\u003c\/li\u003e\n\u003cli\u003eTilt: 90 to 180 degrees\u003c\/li\u003e\n\u003cli\u003ePlate: 5.9 x 5.1 in\u003c\/li\u003e\n\u003cli\u003eHardware: concrete anchors and wood lag screws included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Starlink dish is sold separately.\u003c\/p\u003e","brand":"Low Orbit Supply","offers":[{"title":"9.4-14.5 Inches Arm","offer_id":67794245419178,"sku":"272ff960-7107-49f3-be81-3b2c905f4ef6","price":37.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/8980\/1386\/files\/5c02c39650a732f4da66e8c73c943b7d.jpg?v=1793403066"},{"product_id":"starlink-standard-gen-3-tripod-mount-ground-anchor","title":"Tripod Mount for Starlink Standard Gen 3, 4 and 4X, Ground Anchor","description":"\u003cp\u003eTurn your Starlink Standard kickstand dish into a portable setup you can place anywhere. A precise adapter locks the Gen 3, 4 or 4X dish onto the tripod with no wobble, and a ground anchor drives into soft soil to keep it steady in wind.\u003c\/p\u003e\u003cp\u003eThick tubing and non slip rubber feet resist twisting and shaking on uneven ground. A knob lock adjusts height in seconds so you can clear vehicles, brush or a fence line, and the tripod folds compact for storage in a truck, RV bay or trailer. Use it at camp, on a remote job site or as a backup when the roof mount is not an option.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: Starlink Standard Gen 3, Standard 4 and 4X (kickstand)\u003c\/li\u003e\n\u003cli\u003eStability: ground anchor plus non slip rubber feet\u003c\/li\u003e\n\u003cli\u003eAdjust: knob lock height adjustment\u003c\/li\u003e\n\u003cli\u003eStorage: folding, compact for travel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Starlink dish is sold separately.\u003c\/p\u003e","brand":"Low Orbit Supply","offers":[{"title":"Default Title","offer_id":67794245451946,"sku":"145db461-02e1-46d8-b77b-84b1deaaf21b","price":44.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/8980\/1386\/files\/64d16d74f62caf603e19151ae100c3a6.jpg?v=1793403066"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/8980\/1386\/collections\/hf_20261004_045813_c6e7b612-19fa-457c-89c8-0f464712402c.png?v=1791090082","url":"https:\/\/loworbitsupply.com\/collections\/standard-mounts.oembed","provider":"Low Orbit Supply","version":"1.0","type":"link"}